Welcome to Brise Chemicals
Heatless
How it works
Air is forced through the drying tower, in it moisture and air contaminants are removed and a small amount of air is diverted downwards through the regeneration tower where it depressurizes the desiccant bed to ambient conditions. Velocity is kept low so that air will be in contact in dessicant for some of seconds.Each cycle of this process typically takes a 6 to 10 min time.
| RANGE & Features | Capacity | 230 cfm to 3,400 cfm |
|---|---|---|
| Pressure Dew point | -40° to -100°F | |
| Initial cost | Low | |
| Control | Auto | |
| Space | Less space required | |
| Maintenance Cost | Low |
The air dryer package should be sized and selected to meet the peak system dry air demand for the facility (e.g. instrument air, feed air to nitrogen generator, plant air and process air).
| Air dryers type that we offer | |
|---|---|
| Features | Heatless |
| Initial Cost | Low |
| Operating Cost | Moderate to high |
| Maintenance Cost | Low |
| Dew point | -40° to -100°F dew point |
| Capacity | 230 – 3,400 cfm |
| Purging | 15% |
| Control | Microprocessor control |
| Operating voltage | 250 Vtg 50Hz 1 phase |